# SHT20 default values

**URL:** <https://forum.sensor.community/t/sht20-default-values/2503>\
**Category:** FAQ\
**Created:** [December 19, 2023, 11:01am UTC](https://forum.sensor.community/t/sht20-default-values/2503 "2023-12-19T11:01:42Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![DD\_YY\_MM](https://forum.sensor.community/letter_avatar_proxy/v4/letter/d/91b2a8/32.png) [@DD\_YY\_MM](https://forum.sensor.community/u/DD_YY_MM)\
**Post date:** [December 19, 2023, 11:01am UTC](https://forum.sensor.community/t/sht20-default-values/2503/1 "2023-12-19T11:01:42Z")

</div>

Hi,

I have just started working on SHT20. During initialization I soft reset SHT20 and then read user register and I expect it to read the default values from user register. **BUT IT DOESN’T**.  
As per datasheet it should read the resolution bits to be 00, on-chip heater 0, OTP 1 and reserved can be any unexpected value as they may change over time as per data sheet so I ignore reserved bits.

 ![image](https://forum.sensor.community/uploads/default/original/2X/e/ec01c7738c2de81553ea32aad908299827b8da8b.png)  
But I read 0xBE from user register that is **1** 0111 **110** which indicate resolution bits to be 10, on-chip heater 1.  
How can I trust that this read is correct. Is this a wrong read, is the data sheet wrong or is this normal expected behavior of SHT20?
