# Sensor not measuring

**URL:** https://forum.sensor.community/t/sensor-not-measuring/1643
**Category:** FAQ
**Created:** [November 6, 2022, 12:56pm UTC](https://forum.sensor.community/t/sensor-not-measuring/1643 "2022-11-06T12:56:38Z")
**Posts on this page:** 4
**Page:** 1

<div class="post-metadata">

### Author: ![Ben21](https://forum.sensor.community/user_avatar/forum.sensor.community/ben21/32/1023_2.png) [@Ben21](https://forum.sensor.community/u/Ben21)
#### Post date: [November 6, 2022, 12:56pm UTC](https://forum.sensor.community/t/sensor-not-measuring/1643/1 "2022-11-06T12:56:38Z")

</div>

Hi everyone,  
How come only one sensor is measuring although they’re connected to the same NodeMCU?

 ![image](https://forum.sensor.community/uploads/default/original/2X/6/626b913afc689aac166c56c72f4fc2c50c50b6b9.png)

---

<div class="post-metadata">

### Author: ![pjg](https://forum.sensor.community/user_avatar/forum.sensor.community/pjg/32/194_2.png) [@pjg](https://forum.sensor.community/u/pjg)
#### Post date: [November 7, 2022, 4:48am UTC](https://forum.sensor.community/t/sensor-not-measuring/1643/2 "2022-11-07T04:48:44Z")

</div>

Configuration issue ?  
Câble disconnected?  
Check the Sensor 2 in both the config Interfaces. Everything on thé webpage

---

<div class="post-metadata">

### Author: ![elham\_moeini](https://forum.sensor.community/user_avatar/forum.sensor.community/elham_moeini/32/1832_2.png) [@elham\_moeini](https://forum.sensor.community/u/elham_moeini)
#### Post date: [May 6, 2024, 11:27am UTC](https://forum.sensor.community/t/sensor-not-measuring/1643/3 "2024-05-06T11:27:48Z")

</div>

Hi, I have the same Problem. these senors don’t have date on map, but they have in interface. thank you for your antwort. I have 5 sensors in same place, just 3 von their are in map.

 ![image](https://forum.sensor.community/uploads/default/original/2X/1/1613b76bdcb6235a71c5d97331e7789d4cef17bb.png)  
 ![sensor5](https://forum.sensor.community/uploads/default/original/2X/7/7b6e110d73b49ae348e7759cdcd196cce0d96715.png)  
 ![alle](https://forum.sensor.community/uploads/default/original/2X/3/3b06370c7d1a52926ea62309fa57eaef060cc3c6.png)  
 ![1](https://forum.sensor.community/uploads/default/original/2X/e/ebf0e28fe4a68070f71c8b2a57c4f28269c30f0a.png)  
 ![2](https://forum.sensor.community/uploads/default/original/2X/4/48a75a7bb581b87a6b2441cbcd9598a070bc8716.png)

---

<div class="post-metadata">

### Author: ![fredvduin](https://forum.sensor.community/user_avatar/forum.sensor.community/fredvduin/32/1262_2.png) [@fredvduin](https://forum.sensor.community/u/fredvduin)
#### Post date: [May 14, 2024, 11:21am UTC](https://forum.sensor.community/t/sensor-not-measuring/1643/4 "2024-05-14T11:21:43Z")

</div>

Can you give “Device status” (menu sensor)  
Is the NTP reachable  
Example:  
 ![afbeelding](https://forum.sensor.community/uploads/default/original/2X/e/e5217690bdd0111c7bd86b5316e13b99c23ee72d.png)

Doe you use fixed ip?