# FAQ

**URL:** https://forum.sensor.community/c/faq/5.md?page=3

[Latest](https://forum.sensor.community/latest.md) · [Categories](https://forum.sensor.community/categories.md)

**Page:** 4

---

## [Looks like mine is not registered anymore](https://forum.sensor.community/t/looks-like-mine-is-not-registered-anymore/2665)

<div class="topic-metadata">

**Author:** [@pd9mwo](https://forum.sensor.community/u/pd9mwo)\
**Replies:** 1\
**Last updated:** [March 15, 2024, 12:03pm UTC](https://forum.sensor.community/t/looks-like-mine-is-not-registered-anymore/2665 "2024-03-15T12:03:33Z")

</div>

Hello team Looks like mine sensor isn’t registerd anymore It also is NOT visable on the map , My id’s: ID: 8173175 (8caab57cb677) Firmware version: NRZ-2020-133/EN (Nov 29 2020) Can you please enable/register my se…

---

## [SDS011 readings interval](https://forum.sensor.community/t/sds011-readings-interval/2637)

<div class="topic-metadata">

**Author:** [@frenk](https://forum.sensor.community/u/frenk)\
**Replies:** 6\
**Last updated:** [March 6, 2024, 7:28pm UTC](https://forum.sensor.community/t/sds011-readings-interval/2637 "2024-03-06T19:28:04Z")

</div>

Hi, thanks for reading. I am activating a new sensors station with SDS011 and BMP280. As i can see from the dump I noticed that the PM values ​​are sent sometimes, but not as often as the temperature, humidity and pres…

---

## [Proxy Error on https://api-rrd.madavi.de/grafana](https://forum.sensor.community/t/proxy-error-on-https-api-rrd-madavi-de-grafana/2625)

<div class="topic-metadata">

**Author:** [@Erebus](https://forum.sensor.community/u/Erebus)\
**Replies:** 2\
**Last updated:** [February 25, 2024, 2:28pm UTC](https://forum.sensor.community/t/proxy-error-on-https-api-rrd-madavi-de-grafana/2625 "2024-02-25T14:28:32Z")

</div>

I am getting the following error when I try to open the Madavi dashboard for my sensor. Does anyone know whar this is and how to fix it? I really like this page as it gives me graphical representations over time for PM, …

---

## [Changing wifi (i.e. for a new wifi router, changed SSID)](https://forum.sensor.community/t/changing-wifi-i-e-for-a-new-wifi-router-changed-ssid/2616)

<div class="topic-metadata">

**Author:** [@ricki-z](https://forum.sensor.community/u/ricki-z)\
**Replies:** 0\
**Last updated:** [February 20, 2024, 11:01pm UTC](https://forum.sensor.community/t/changing-wifi-i-e-for-a-new-wifi-router-changed-ssid/2616 "2024-02-20T23:01:34Z")

</div>

Please restart the device. It should then open a hotspot again (for 10 minutes). If you can see the hotspot then you can follow the instructions for the “first time” configuration: https://sensor.community/en/sensors/a…

---

## [Getting InfluxDB working](https://forum.sensor.community/t/getting-influxdb-working/2093)

<div class="topic-metadata">

**Author:** [@Andy\_Godber](https://forum.sensor.community/u/Andy_Godber)\
**Replies:** 2\
**Last updated:** [February 9, 2024, 12:24am UTC](https://forum.sensor.community/t/getting-influxdb-working/2093 "2024-02-09T00:24:22Z")

</div>

I saw a couple of people asking for help in getting the InfluxDB integration working - Im also having a problem with this (DB V1). Nothing appears in the Debug log…is it even trying to connect to my DB server? Edit:res…

---

## [Temperature sensors](https://forum.sensor.community/t/temperature-sensors/2553)

<div class="topic-metadata">

**Author:** [@LeGrenier](https://forum.sensor.community/u/LeGrenier)\
**Replies:** 5\
**Last updated:** [January 21, 2024, 6:34pm UTC](https://forum.sensor.community/t/temperature-sensors/2553 "2024-01-21T18:34:16Z")

</div>

On the map sensor, we see that some sensors have an operational temperature sensor delivering realistic values. However the data recorded by many of these sensors are not available in the sensor archives. How to secure t…

---

## [BME280 pressure data](https://forum.sensor.community/t/bme280-pressure-data/2520)

<div class="topic-metadata">

**Author:** [@v6tunnler](https://forum.sensor.community/u/v6tunnler)\
**Replies:** 11\
**Last updated:** [January 15, 2024, 12:22pm UTC](https://forum.sensor.community/t/bme280-pressure-data/2520 "2024-01-15T12:22:07Z")

</div>

Hello Community! With BME280 i get pressure data like “864.888468325277”?, it seems to be wrong. Antibody has an idea how no normalize it? BTW, I got the same values with two different devices (one time NodeMCU + one …

---

## [Esp8266+sds011+dht22](https://forum.sensor.community/t/esp8266-sds011-dht22/2513)

<div class="topic-metadata">

**Author:** [@Ratingenwetter](https://forum.sensor.community/u/Ratingenwetter)\
**Replies:** 0\
**Last updated:** [December 29, 2023, 4:22pm UTC](https://forum.sensor.community/t/esp8266-sds011-dht22/2513 "2023-12-29T16:22:57Z")

</div>

Hello everyone, I have a question and ask for help, I have made a new SDS011 sensor with an ESP8266, plus a DHT22 sensor, I have been running this script for years, but how do I get the DHT22 sensor integrated into it? ,…

---

## [SHT20 default values](https://forum.sensor.community/t/sht20-default-values/2503)

<div class="topic-metadata">

**Author:** [@DD\_YY\_MM](https://forum.sensor.community/u/DD_YY_MM)\
**Replies:** 0\
**Last updated:** [December 19, 2023, 11:01am UTC](https://forum.sensor.community/t/sht20-default-values/2503 "2023-12-19T11:01:42Z")

</div>

Hi, I have just started working on SHT20. During initialization I soft reset SHT20 and then read user register and I expect it to read the default values from user register. BUT IT DOESN’T. As per datasheet it should r…

---

## [Is there someone to help me](https://forum.sensor.community/t/is-there-someone-to-help-me/2467)

<div class="topic-metadata">

**Author:** [@ap-zwinkels](https://forum.sensor.community/u/ap-zwinkels)\
**Replies:** 1\
**Last updated:** [December 11, 2023, 3:24pm UTC](https://forum.sensor.community/t/is-there-someone-to-help-me/2467 "2023-12-11T15:24:30Z")

</div>

I am living in the Netherlands looking for help to build some sensors and a network for noise registration. Is there someone available? Ap

---

## [Calibration of PMS7003](https://forum.sensor.community/t/calibration-of-pms7003/1199)

<div class="topic-metadata">

**Author:** [@Drew\_B](https://forum.sensor.community/u/Drew_B)\
**Replies:** 4\
**Last updated:** [December 9, 2023, 5:06pm UTC](https://forum.sensor.community/t/calibration-of-pms7003/1199 "2023-12-09T17:06:18Z")

</div>

Hi I’ve just set up an new sensor outside my house. It’s using a PMS7003 particulate sensor. I’ve noticed that it is the highest reading in my city. Currently reading PM2.5 of 56 ug/m^3, when the 3 nearest nodes average…

---

## [Basic knowledge (PM2.5, PM10)](https://forum.sensor.community/t/basic-knowledge-pm2-5-pm10/2401)

<div class="topic-metadata">

**Author:** [@nick](https://forum.sensor.community/u/nick)\
**Replies:** 7\
**Last updated:** [November 18, 2023, 12:11pm UTC](https://forum.sensor.community/t/basic-knowledge-pm2-5-pm10/2401 "2023-11-18T12:11:57Z")

</div>

Hi everyone. I just orderd my sensor parts and was wondering, why there is the most basic information so hard to find on the mainpage and also in the forum: what does PM2.5 and PM10 mean, anyway? So, for all newbies: G…

---

## [BME280 high temperature value](https://forum.sensor.community/t/bme280-high-temperature-value/2417)

<div class="topic-metadata">

**Author:** [@darekpawel](https://forum.sensor.community/u/darekpawel)\
**Replies:** 0\
**Last updated:** [November 16, 2023, 7:22pm UTC](https://forum.sensor.community/t/bme280-high-temperature-value/2417 "2023-11-16T19:22:18Z")

</div>

Nothing was changed since Months… Today I noticed wrong temperature display… Any idea what could be wrong?

---

## [BME280 measurement error](https://forum.sensor.community/t/bme280-measurement-error/2331)

<div class="topic-metadata">

**Author:** [@nari](https://forum.sensor.community/u/nari)\
**Replies:** 1\
**Last updated:** [October 8, 2023, 4:23pm UTC](https://forum.sensor.community/t/bme280-measurement-error/2331 "2023-10-08T16:23:04Z")

</div>

I observe with the sensor BME280 with reference to the humidity a behavior that I do not understand. For years, a curve was always displayed, now there are periods in which the value falls to zero, remains there for a wh…

---

## [nodeMCU and BME280 sensor](https://forum.sensor.community/t/nodemcu-and-bme280-sensor/2320)

<div class="topic-metadata">

**Author:** [@c-mania](https://forum.sensor.community/u/c-mania)\
**Replies:** 1\
**Last updated:** [September 27, 2023, 5:37pm UTC](https://forum.sensor.community/t/nodemcu-and-bme280-sensor/2320 "2023-09-27T17:37:17Z")

</div>

hello, I have left a nodeMCU v0.9 - is it possible together with the BME280 sensor and is there a software for that. many thanks, Peter

---

## [Weird measurements - spider is in hose](https://forum.sensor.community/t/weird-measurements-spider-is-in-hose/2311)

<div class="topic-metadata">

**Author:** [@nhet](https://forum.sensor.community/u/nhet)\
**Replies:** 3\
**Last updated:** [September 25, 2023, 11:25am UTC](https://forum.sensor.community/t/weird-measurements-spider-is-in-hose/2311 "2023-09-25T11:25:34Z")

</div>

I have noticed over the last few days that the measurements have been getting lower and today even showed 0. I first thought that it was hardware damage. When I checked the system, I could see that a spider had made itse…

---

## [Wind sensor with esp](https://forum.sensor.community/t/wind-sensor-with-esp/1257)

<div class="topic-metadata">

**Author:** [@nari](https://forum.sensor.community/u/nari)\
**Replies:** 11\
**Last updated:** [September 9, 2023, 10:55am UTC](https://forum.sensor.community/t/wind-sensor-with-esp/1257 "2023-09-09T10:55:05Z")

</div>

Rather than putting “airrohr” in a tube, I took in a box. Sensors are working fine. check out Umweltdaten - h-reiners.de Here, having wind sensors would by fine. Any economic solution doing it with the esp module ?

---

## [What are the sensors needed to detect nuclear wastewater?](https://forum.sensor.community/t/what-are-the-sensors-needed-to-detect-nuclear-wastewater/2273)

<div class="topic-metadata">

**Author:** [@Miya\_Huang](https://forum.sensor.community/u/Miya_Huang)\
**Replies:** 2\
**Last updated:** [August 25, 2023, 7:18am UTC](https://forum.sensor.community/t/what-are-the-sensors-needed-to-detect-nuclear-wastewater/2273 "2023-08-25T07:18:30Z")

</div>

Hello Friends, After Japan announced the discharge of nuclear wastewater, each country will certainly strengthen the importance of the issue of water quality testing, then there will be a broad market for sensors to mea…

---

## [Finding the Sensor IP once connected to WIFI network](https://forum.sensor.community/t/finding-the-sensor-ip-once-connected-to-wifi-network/2265)

<div class="topic-metadata">

**Author:** [@Mik\_len](https://forum.sensor.community/u/Mik_len)\
**Replies:** 3\
**Last updated:** [August 21, 2023, 3:29pm UTC](https://forum.sensor.community/t/finding-the-sensor-ip-once-connected-to-wifi-network/2265 "2023-08-21T15:29:20Z")

</div>

Hello community! I am having an issue with connecting to the sensor page through my local network. The sensor is running perfectly and actively making measurements (great!) but I cannot see the AirRohr IP address to logi…

---

## [Doubt on PM data](https://forum.sensor.community/t/doubt-on-pm-data/2262)

<div class="topic-metadata">

**Author:** [@nari](https://forum.sensor.community/u/nari)\
**Replies:** 3\
**Last updated:** [August 19, 2023, 11:00pm UTC](https://forum.sensor.community/t/doubt-on-pm-data/2262 "2023-08-19T23:00:05Z")

</div>

The SDS011 sensors have been in use for more than 2 years now. Do these sensors require maintenance ? and if so, how ? Or are they simply worthless after a certain time ? When comparing the data at the 3 locations, I h…

---

## [PM data not on map, but T, pressure are](https://forum.sensor.community/t/pm-data-not-on-map-but-t-pressure-are/2247)

<div class="topic-metadata">

**Author:** [@Jos](https://forum.sensor.community/u/Jos)\
**Replies:** 9\
**Last updated:** [August 12, 2023, 5:58pm UTC](https://forum.sensor.community/t/pm-data-not-on-map-but-t-pressure-are/2247 "2023-08-12T17:58:18Z")

</div>

I have added a new sensor. Before i installed it I have tested it and all the data was seen on Grafana. After installing, some days later, I looked on the map and I saw that the PM were zero. My other sensor is working …

---

## [Only fine dust values are transmitted, not temperature, humidity and pressure.](https://forum.sensor.community/t/only-fine-dust-values-are-transmitted-not-temperature-humidity-and-pressure/2227)

<div class="topic-metadata">

**Author:** [@Marv](https://forum.sensor.community/u/Marv)\
**Replies:** 7\
**Last updated:** [July 30, 2023, 6:31pm UTC](https://forum.sensor.community/t/only-fine-dust-values-are-transmitted-not-temperature-humidity-and-pressure/2227 "2023-07-30T18:31:31Z")

</div>

I assembled and registered my first Sensor. Community sensor yesterday. I use the SDS011 sensor for fine dust and the BME280 for air pressure, temperature and humidity. However, when registering I only specified the SDS…

---

## [Can't push data](https://forum.sensor.community/t/cant-push-data/2193)

<div class="topic-metadata">

**Author:** [@lincomatic](https://forum.sensor.community/u/lincomatic)\
**Replies:** 6\
**Last updated:** [July 25, 2023, 11:07pm UTC](https://forum.sensor.community/t/cant-push-data/2193 "2023-07-25T23:07:58Z")

</div>

I’m trying to push data from a PMS-5003 with my own code. When I try to POST the data, the server responds with code 301. Here is a sample data payload: { “software\_version”: “myfirmware”, “sensordatavalues”: \[ { “v…

---

## [Sensor resetting everthing up](https://forum.sensor.community/t/sensor-resetting-everthing-up/2188)

<div class="topic-metadata">

**Author:** [@Hanrich](https://forum.sensor.community/u/Hanrich)\
**Replies:** 5\
**Last updated:** [July 7, 2023, 11:37am UTC](https://forum.sensor.community/t/sensor-resetting-everthing-up/2188 "2023-07-07T11:37:42Z")

</div>

Hey guys, a year ago I tried almost got my sensor working and was just checking some things for the BME280 as it didn’t give me all values. I remember that I tried around a little, but really do have really unspecific m…

---

## [Display sensor on map.sensor.community and using an air quality lamp from the project stofananas together with a sensor](https://forum.sensor.community/t/display-sensor-on-map-sensor-community-and-using-an-air-quality-lamp-from-the-project-stofananas-together-with-a-sensor/2176)

<div class="topic-metadata">

**Author:** [@webmarwell](https://forum.sensor.community/u/webmarwell)\
**Replies:** 9\
**Last updated:** [July 6, 2023, 3:55pm UTC](https://forum.sensor.community/t/display-sensor-on-map-sensor-community-and-using-an-air-quality-lamp-from-the-project-stofananas-together-with-a-sensor/2176 "2023-07-06T15:55:41Z")

</div>

Hi everybody, I teached a class at a school in Beijing building the sensors and the stofananas air quality lamp. One of the pupils has the problem, that the sensor doesn’t show up on the map and lamp doesn’t show the ri…

---

## [Get place/city name?](https://forum.sensor.community/t/get-place-city-name/2141)

<div class="topic-metadata">

**Author:** [@Cristian\_Scalingi](https://forum.sensor.community/u/Cristian_Scalingi)\
**Replies:** 2\
**Last updated:** [June 9, 2023, 7:52am UTC](https://forum.sensor.community/t/get-place-city-name/2141 "2023-06-09T07:52:28Z")

</div>

Hi all, as the title suggests, I would like to ask if it is possible to obtain the name of the place/city from which I am taking the data recorded through the sensor installed in that same place (through a GET call like…

---

## [No2 measures on sensor map](https://forum.sensor.community/t/no2-measures-on-sensor-map/2150)

<div class="topic-metadata">

**Author:** [@rotor-studio](https://forum.sensor.community/u/rotor-studio)\
**Replies:** 1\
**Last updated:** [June 9, 2023, 6:59am UTC](https://forum.sensor.community/t/no2-measures-on-sensor-map/2150 "2023-06-09T06:59:11Z")

</div>

I have seen that measurements are now available on the map in No2. Recently in Spain we have measured several cities and at least 20 schools in each one (160 schools). How can we contribute to the data on the map? https…

---

## [Weird measurements](https://forum.sensor.community/t/weird-measurements/2102)

<div class="topic-metadata">

**Author:** [@Ben21](https://forum.sensor.community/u/Ben21)\
**Replies:** 10\
**Last updated:** [May 22, 2023, 12:04pm UTC](https://forum.sensor.community/t/weird-measurements/2102 "2023-05-22T12:04:51Z")

</div>

Hi everyone, Does anyone know how two sensor (literally 1 metre apart) have a measurement deviation of 30 %? Kind regards, Ben21

---

## [Sensors for air pollution measurement](https://forum.sensor.community/t/sensors-for-air-pollution-measurement/2117)

<div class="topic-metadata">

**Author:** [@Geza\_Mihalyi](https://forum.sensor.community/u/Geza_Mihalyi)\
**Replies:** 0\
**Last updated:** [May 12, 2023, 5:46pm UTC](https://forum.sensor.community/t/sensors-for-air-pollution-measurement/2117 "2023-05-12T17:46:01Z")

</div>

Hello there, I am new to the forum. Let me paint my scenario. Me and my friend are university students who would like to create a drone to measure air quality. It would be of course a DIY drone and as we were/are looking…

---

## [Using OLED display?](https://forum.sensor.community/t/using-oled-display/2097)

<div class="topic-metadata">

**Author:** [@Andy\_Godber](https://forum.sensor.community/u/Andy_Godber)\
**Replies:** 2\
**Last updated:** [May 1, 2023, 6:45pm UTC](https://forum.sensor.community/t/using-oled-display/2097 "2023-05-01T18:45:30Z")

</div>

To use the OLED display SSD is it really just as simple as connecting to D3 and D4 on ESP8266? I have no success with this, including with/without the BME280 configured or connected. There is no sign of any display, a…

[Previous page](https://forum.sensor.community/c/faq/5.md?page=2)

[Next page](https://forum.sensor.community/c/faq/5.md?page=4)
